Your trolley is empty View Checkout
P: 0800 687 429
0800 687 429
ART Active DI Dual Ch.
Enlarge +
ART

DUALXDIRECT

ART Active DI Dual Ch.

Our Price: $99.99

Limited Stock
Product normally ships next business day
or 10 easy payments of $10.00
with Buy ART Active DI Dual Ch. with 10 easy payments of $10.00 using genoapay at MusicworksWhat's this?
or 10 easy payments of $10.00 with Buy ART Active DI Dual Ch. with 10 easy payments of $10.00 using genoapay at Musicworks
Online only

or apply for easy finance here

Finance Now
Weekly Payments:
52 wks
$3.28
104 wks
$1.84
156 wks
$1.36
In-store only
Limited Stock
Product normally ships next business day

Quantity:

Product Description

The DUALXDirect provides two independent high quality active interfaces that let you connect instrument,
line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR
inputs (provided via "combo" jacks) are buffered and converted by very low noise active electronics into an
isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency
response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a
wide variety of signal sources and over long signal runs in high noise environments.

  • Fully Active Design
  • Phantom Voltage or 9v Battery Powered
  • Converts High-Impedance Balanced / Unbalanced Inputs Into 600 ohm Balanced Outputs
  • Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter
  • Switchable phase invert
  • Switchable ground lift (fully isolates inputs from chassis and outputs)
  • 1/4-Inch TRS | XLR Combi Jack Inputs
  • Rugged Extruded Aluminum Case

Frequency Response

10 Hz - 100 kHz, ± 0.5 dB @ +0 dBu

Total Harmonic Distortion

<.05% (typical)

Dynamic Range

>100 dB (typical)

Channel Separation

> 80 dB (typical)

Maximum Input Level

+4, +34 dBu

Maximum Output Level

+6 dBu (battery powered), +14 dBu (phantom powered)

Input Connections

1/4-inch TRS | XLR female balanced / unbalanced (2), 470k O

Thru Connections

1/4-inch TRS (2)

Output Connections

XLR male balanced (2), <600 O

Input Attenuation

Switchable, (0, -30 dB)

Power Requirements

9V @ 7.5 mA (battery,Alkaline recommended),

18 - 48V DC @ 6.4 mA (phantom power, per channel)

Dimensions

1.85"H x 4.6"W x 3.9"D (47mm x 117mm x 99mm)

Weight

0.84 lbs (0.38 kg)

The DUALXDirect provides two independent high quality active interfaces that let you connect instrument,
line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 1/4" and XLR
inputs (provided via "combo" jacks) are buffered and converted by very low noise active electronics into an
isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency
response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a
wide variety of signal sources and over long signal runs in high noise environments.

  • Fully Active Design
  • Phantom Voltage or 9v Battery Powered
  • Converts High-Impedance Balanced / Unbalanced Inputs Into 600 ohm Balanced Outputs
  • Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter
  • Switchable phase invert
  • Switchable ground lift (fully isolates inputs from chassis and outputs)
  • 1/4-Inch TRS | XLR Combi Jack Inputs
  • Rugged Extruded Aluminum Case

Frequency Response

10 Hz - 100 kHz, ± 0.5 dB @ +0 dBu

Total Harmonic Distortion

<.05% (typical)

Dynamic Range

>100 dB (typical)

Channel Separation

> 80 dB (typical)

Maximum Input Level

+4, +34 dBu

Maximum Output Level

+6 dBu (battery powered), +14 dBu (phantom powered)

Input Connections

1/4-inch TRS | XLR female balanced / unbalanced (2), 470k O

Thru Connections

1/4-inch TRS (2)

Output Connections

XLR male balanced (2), <600 O

Input Attenuation

Switchable, (0, -30 dB)

Power Requirements

9V @ 7.5 mA (battery,Alkaline recommended),

18 - 48V DC @ 6.4 mA (phantom power, per channel)

Dimensions

1.85"H x 4.6"W x 3.9"D (47mm x 117mm x 99mm)

Weight

0.84 lbs (0.38 kg)

Estimate Delivery Cost

Ratings & Reviews Write a review   Average Rating: No reviews yet

No one has reviewed this product yet. Why not post your own review below?

You need to be logged in to write a review.

Click here to log in, or here to register