MusicWorks - musicians helping musicians
Your trolley is empty View Checkout
P: 0800 687 429
0800 687 429
Laney IRT-60212 Ironheart Electric Guitar Tube Amplifier 2 x 12
Enlarge +
Laney

IRT60212

Laney IRT-60212 Ironheart Electric Guitar Tube Amplifier 2 x 12

RRP: $1,895.00

Our Price: $1,499.00

Save $396

Floor Stock
Clearance
or 10 easy payments of $149.90
with Buy Laney IRT-60212 Ironheart Electric Guitar Tube Amplifier 2 x 12 with 10 easy payments of $149.90 using genoapay at MusicworksWhat's this?
or 10 easy payments of $149.90 with Buy Laney IRT-60212 Ironheart Electric Guitar Tube Amplifier 2 x 12 with 10 easy payments of $149.90 using genoapay at Musicworks
Online only

GEM VISA FINANCE

Enjoy Interest Free with your Gem Visa

or apply for easy finance at online checkout

Finance Now
Weekly Payments:
52 wks
$34.31
104 wks
$19.45
156 wks
$14.50
apply in-store or at online checkout
Floor Stock

Quantity:

Product Description

A thoroughly modern sounding 2 x 12” combo, high gain, lots of smooth compression and packed full of features, the IRT60-212 is an extremely versatile, aggressive sounding combo delivering plenty of low-end growl and punch. Featuring a full 3-channel pre-amp with clean, rhythm and lead channels, plus a footswitchable pre-boost section. The IRT60-212 also features a variwatts control, which allows you to get the tone you are after at any wattage level without compromising your tone.

  • On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.
  • The Vari-Watts control the signal level within the power amplifier, allowing it to be driven harder at lower volume levels. For full output power, running the power tubes at maximum levels, turn this control fully clockwise. To reduce output volume, turn this control to the left.
  • The XLR-DI out allows you to connect your amplifier to a PA system or recording interface, without the need for micing. It is fully balanced and features a level switch for -30dB (PA/Desk level) or +4dB (Line level) for driving powered cabinets directly. The XLR-DI out also features a ground lift switch is also provided for lowest noise performance. Unlike most other XLR-DI out, the Laney fitted XLR-DI out is post the output section of the amp.
  • Pulling on each of the EQ control knobs will shift the response of each control as follows: Bass: Deep - This extends the low-end frequency response, resulting in a fuller, heavier sound for lower notes. Mid: Shift - This lowers the frequency range of the mid control to give a tighter sound. Treble: Shift - This broadens the Treble control frequency response, to give a rounder sound to higher notes, especially when used with thin sounding pickups.

Dynamics control

3 channels + switchable boost

Item dimensions: 526mm x 715mm x 288mm (HWD)

Carton dimensions: 591mm x 787mm x 360mm (HWD)

Item weight: 36.30kg

A thoroughly modern sounding 2 x 12” combo, high gain, lots of smooth compression and packed full of features, the IRT60-212 is an extremely versatile, aggressive sounding combo delivering plenty of low-end growl and punch. Featuring a full 3-channel pre-amp with clean, rhythm and lead channels, plus a footswitchable pre-boost section. The IRT60-212 also features a variwatts control, which allows you to get the tone you are after at any wattage level without compromising your tone.

  • On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.
  • The Vari-Watts control the signal level within the power amplifier, allowing it to be driven harder at lower volume levels. For full output power, running the power tubes at maximum levels, turn this control fully clockwise. To reduce output volume, turn this control to the left.
  • The XLR-DI out allows you to connect your amplifier to a PA system or recording interface, without the need for micing. It is fully balanced and features a level switch for -30dB (PA/Desk level) or +4dB (Line level) for driving powered cabinets directly. The XLR-DI out also features a ground lift switch is also provided for lowest noise performance. Unlike most other XLR-DI out, the Laney fitted XLR-DI out is post the output section of the amp.
  • Pulling on each of the EQ control knobs will shift the response of each control as follows: Bass: Deep - This extends the low-end frequency response, resulting in a fuller, heavier sound for lower notes. Mid: Shift - This lowers the frequency range of the mid control to give a tighter sound. Treble: Shift - This broadens the Treble control frequency response, to give a rounder sound to higher notes, especially when used with thin sounding pickups.

Dynamics control

3 channels + switchable boost

Item dimensions: 526mm x 715mm x 288mm (HWD)

Carton dimensions: 591mm x 787mm x 360mm (HWD)

Item weight: 36.30kg

Estimate Delivery Cost

Ratings & Reviews Write a review   Average Rating: No reviews yet

No one has reviewed this product yet. Why not post your own review below?

You need to be logged in to write a review.

Click here to log in, or here to register