Your trolley is empty View Checkout
P: 0800 687 429
0800 687 429
SE Electronics Dynamite Mic Preamp
Enlarge +
SE Electronics

SEDM1

SE Electronics Dynamite Mic Preamp

Our Price: $249.00

In Stock
Product normally ships next business day
or 10 easy payments of $24.90
with Buy SE Electronics Dynamite Mic Preamp with 10 easy payments of $24.90 using genoapay at MusicworksWhat's this?
or 10 easy payments of $24.90 with Buy SE Electronics Dynamite Mic Preamp with 10 easy payments of $24.90 using genoapay at Musicworks
Online only

or apply for easy finance here

Finance Now
Weekly Payments:
52 wks
$6.74
104 wks
$3.87
156 wks
$2.91
In-store only
In Stock
Product normally ships next business day

Quantity:

Product Description

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent 28dB regardless of the connected load, thanks to its dedicated buffer amplifier. The DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp -- all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

  • +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD designed for neutral, balanced sound quality
  • State of the art electronics and high-grade FETs provide supremely low noise
  • Transformerless design for pristine sound quality
  • Provides the lowest noise in its class
  • Provides +28dB output independent of load impedance or cable length
  • Extremely low output impedance
  • Drives long cable runs and can reduce susceptibility to RF interference, buzz & hum
  • Efficient rejection of any electrical interference and noise
  • High-quality finish ensures a great look for many years
  • Slim design allows for easy placement in the studio or on stage

Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)

Gain: 28 dB (load 1kOhms)

Max output level (0.5% THD): 8.3 dBV (2.6 V)

Output noise level: 9 µV (JIS-A)

Powering: 48 Volts according toIEC 61938

Electrical impedance: 135 Ohms

Recommended load impedance: >1k Ohms

Current consumption: 3.0 mA

Connectivity: 3-pin male/female XLR connector

Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)

Weight: 80 g (2.82 oz.)

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent 28dB regardless of the connected load, thanks to its dedicated buffer amplifier. The DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp -- all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

  • +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD designed for neutral, balanced sound quality
  • State of the art electronics and high-grade FETs provide supremely low noise
  • Transformerless design for pristine sound quality
  • Provides the lowest noise in its class
  • Provides +28dB output independent of load impedance or cable length
  • Extremely low output impedance
  • Drives long cable runs and can reduce susceptibility to RF interference, buzz & hum
  • Efficient rejection of any electrical interference and noise
  • High-quality finish ensures a great look for many years
  • Slim design allows for easy placement in the studio or on stage

Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)

Gain: 28 dB (load 1kOhms)

Max output level (0.5% THD): 8.3 dBV (2.6 V)

Output noise level: 9 µV (JIS-A)

Powering: 48 Volts according toIEC 61938

Electrical impedance: 135 Ohms

Recommended load impedance: >1k Ohms

Current consumption: 3.0 mA

Connectivity: 3-pin male/female XLR connector

Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)

Weight: 80 g (2.82 oz.)

Estimate Delivery Cost

Ratings & Reviews Write a review   Average Rating: No reviews yet

No one has reviewed this product yet. Why not post your own review below?

You need to be logged in to write a review.

Click here to log in, or here to register