Your trolley is empty View Checkout
P: 0800 687 429
0800 687 429
ART Active DI
Enlarge +
ART

XDIRECT

ART Active DI

Our Price: $79.99

Floor Stock
or 10 easy payments of $8.00
with Buy ART Active DI with 10 easy payments of $8.00 using genoapay at MusicworksWhat's this?
or 10 easy payments of $8.00 with Buy ART Active DI with 10 easy payments of $8.00 using genoapay at Musicworks
Online only

or apply for easy finance here

Finance Now
Weekly Payments:
52 wks
$2.82
104 wks
$1.57
156 wks
$1.15
In-store only
Floor Stock

Quantity:

Product Description

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level
signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are
buffered and converted, by very low noise active electronics, into an isolated balanced low
impedance signal source. The Xdirect has an extremely flat and wide frequency response and can
handle high signal levels while still maintaining an isolated balanced low impedance output.
This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and
over long signal runs in high noise environments.


The Input Attenuator switches allow for a wide range of signal levels and the Input Link jack
allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate
the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing
hum and ground-loop noise.

What further sets the Xdirect apart from other "Active DI" boxes are its extended features and
versatility. We have added a switchable low pass Filter that cuts out all very high frequency
interference. This Bessel filter on the input is placed out of the audio range and is primarily
intended to reduce radio frequency interference before it gets into the main system.
The filter is also very effective in reducing any digital computer noise artifacts when using the
Xdirect as an interface between a computer based audio workstation and your monitors.

A Phase Invert switch, while not normally included with your run of the mill D.I. box, has been
added to allow you to switch signal polarity right at the source. This feature is especially
handy when you are combining a direct tap with a microphone feed in the mix.

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level
signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are
buffered and converted, by very low noise active electronics, into an isolated balanced low
impedance signal source. The Xdirect has an extremely flat and wide frequency response and can
handle high signal levels while still maintaining an isolated balanced low impedance output.
This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and
over long signal runs in high noise environments.


The Input Attenuator switches allow for a wide range of signal levels and the Input Link jack
allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate
the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing
hum and ground-loop noise.

What further sets the Xdirect apart from other "Active DI" boxes are its extended features and
versatility. We have added a switchable low pass Filter that cuts out all very high frequency
interference. This Bessel filter on the input is placed out of the audio range and is primarily
intended to reduce radio frequency interference before it gets into the main system.
The filter is also very effective in reducing any digital computer noise artifacts when using the
Xdirect as an interface between a computer based audio workstation and your monitors.

A Phase Invert switch, while not normally included with your run of the mill D.I. box, has been
added to allow you to switch signal polarity right at the source. This feature is especially
handy when you are combining a direct tap with a microphone feed in the mix.

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level
signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are
buffered and converted, by very low noise active electronics, into an isolated balanced low
impedance signal source. The Xdirect has an extremely flat and wide frequency response and can
handle high signal levels while still maintaining an isolated balanced low impedance output.
This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and
over long signal runs in high noise environments.


The Input Attenuator switches allow for a wide range of signal levels and the Input Link jack
allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate
the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing
hum and ground-loop noise.

What further sets the Xdirect apart from other "Active DI" boxes are its extended features and
versatility. We have added a switchable low pass Filter that cuts out all very high frequency
interference. This Bessel filter on the input is placed out of the audio range and is primarily
intended to reduce radio frequency interference before it gets into the main system.
The filter is also very effective in reducing any digital computer noise artifacts when using the
Xdirect as an interface between a computer based audio workstation and your monitors.

A Phase Invert switch, while not normally included with your run of the mill D.I. box, has been
added to allow you to switch signal polarity right at the source. This feature is especially
handy when you are combining a direct tap with a microphone feed in the mix.

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level
signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are
buffered and converted, by very low noise active electronics, into an isolated balanced low
impedance signal source. The Xdirect has an extremely flat and wide frequency response and can
handle high signal levels while still maintaining an isolated balanced low impedance output.
This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and
over long signal runs in high noise environments.


The Input Attenuator switches allow for a wide range of signal levels and the Input Link jack
allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate
the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing
hum and ground-loop noise.

What further sets the Xdirect apart from other "Active DI" boxes are its extended features and
versatility. We have added a switchable low pass Filter that cuts out all very high frequency
interference. This Bessel filter on the input is placed out of the audio range and is primarily
intended to reduce radio frequency interference before it gets into the main system.
The filter is also very effective in reducing any digital computer noise artifacts when using the
Xdirect as an interface between a computer based audio workstation and your monitors.

A Phase Invert switch, while not normally included with your run of the mill D.I. box, has been
added to allow you to switch signal polarity right at the source. This feature is especially
handy when you are combining a direct tap with a microphone feed in the mix.

Estimate Delivery Cost

Ratings & Reviews Write a review   Average Rating: No reviews yet

No one has reviewed this product yet. Why not post your own review below?

You need to be logged in to write a review.

Click here to log in, or here to register