MusicWorks - musicians helping musicians
Your trolley is empty View Checkout
P: 0800 687 429
0800 687 429
Yamaha DZR12-D 2000W 12 inch Powered Speaker with Dante
Enlarge +
Yamaha

DZR12D

Yamaha DZR12-D 2000W 12 inch Powered Speaker with Dante

Our Price: POA

Request a price

Product Description

The Yamaha DZR12-D is a Dante-equipped, 2-way powered loudspeaker designed for main/FOH and floor monitor applications. The 2000W Class-D bi-amp powers the 12" woofer and 2" compression driver, which combine to provide a frequency range of 39 Hz to 20 kHz (-10 dB) with a maximum SPL of 139 dB. The rotatable horn allows for vertical or horizontal mounting to further adapt the acoustic dimensions of a venue. The constant directivity horn was designed with the goal of providing smooth, level coverage across the intended coverage area, minimizing roll-off that is common in conventional horn designs.


The on-board 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR12-D is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multi-band compressor that ensures the DZR12-D's sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low-end that is typically lost when flying speakers, while the Monitor mode is optimized for floor monitoring application by taming problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to deliver the clarity professionals demand from their stage monitors.


The rear panel offers two combo XLR-1/4" inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The DZR12-D is equipped with an additional panel with two etherCON connectors (2-in/2-out) for interfacing with other Dante compatible equipment such as other speakers and Yamaha's CL/QL/TF digital mixing consoles. The Yamaha DZR12-D ships with a standard IEC power cord.

  • 2-way powered loudspeaker with a 2” HF and a 12" LF
  • Maximum 139dB SPL and 39Hz-20kHz frequency range is ideal for today's professional audio demands
  • High power 2000W Class-D amplifier module
  • 96kHz DSP and FIR filter for true high-resolution sound with super low latency
  • Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
  • Equipped with Dante I/O (2in/2out) and features SRC (sample rate conversion) allowing 48kHz device compatibility
  • Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
  • D-Contour and highly reliable protection circuits
  • Floor monitoring setting enables mirroring configuration
  • Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
  • Optional speaker cover (SPCVR-DZR12)
  • Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement

Configuration:

Active 2-Way

Enclosure Type:

Bass-Reflex Loudspeaker

Total Power Capacity:

2000 W Peak

1300 W RMS

Amplifier Power Rating

LF:1000 W Peak - 920 W RMS

HF:

1000 W Peak - 380 W RMS

Amplifier Class:

Class-D

HF Driver:

1 x Titanium Compression Driver with 1" / 25.4 mm Throat

HF Voice Coil:

2" / 50.8 mm

LF Driver:

1 x 12" / 30.5 cm Woofer

LF Voice Coil:

3" / 76.2 mm

Magnet HF:

Neodymium

LF:

Neodymium

Frequency Range:

39 Hz to 20 kHz -10 dB

Maximum SPL:

139 dB

Coverage Angle:

90° H x 60° V (Rotatable Horn)

50° H x 50° V (Monitor)

Max Line Input Level:

+24 dBu

I/O Impedance Input:

20 kOhms

Audio I/O:

2 x Combo XLR-1/4" Input - 2 x XLR Output

Network I/O:

2 x etherCON (Dante)

USB:

1 x USB Type-A (External Memory, Host Connection)

Crossover:

1.8 kHz

Max Sample Rate/Resolution:

96 kHz

AC Power Connector:

1 x IEC (Locking)

Power Consumption:

45 W (Idle) - 150 W (1/8 Power)

Mounting:

12 x M10 - 2 x 1.4" / 35 mm Pole Socket (Dual Angle)

Handles:

2

Construction Material:

Plywood

Dimensions:

16.1 x 25.4 x 15.5" / 408.9 x 645.2 x 393.7 mm

Weight:

47.2 lb / 21.4 kg

The Yamaha DZR12-D is a Dante-equipped, 2-way powered loudspeaker designed for main/FOH and floor monitor applications. The 2000W Class-D bi-amp powers the 12" woofer and 2" compression driver, which combine to provide a frequency range of 39 Hz to 20 kHz (-10 dB) with a maximum SPL of 139 dB. The rotatable horn allows for vertical or horizontal mounting to further adapt the acoustic dimensions of a venue. The constant directivity horn was designed with the goal of providing smooth, level coverage across the intended coverage area, minimizing roll-off that is common in conventional horn designs.


The on-board 96 kHz DSP processor utilizes Advanced FIR filters for the crossover network and corrective EQ. With the FIR filters, the DZR12-D is able to produce a smooth frequency response for remarkable clarity and sound imaging without phase distortion. The onboard LCD screen allows users to easily navigate the variety of DSP functions, load presets, and adjust PEQ, delay, and routing. The D-CONTOUR is an intelligent multi-band compressor that ensures the DZR12-D's sound stays consistent and clear no matter how hard you drive them. The FOH/Main mode boosts the lower frequencies to compensate for low-end that is typically lost when flying speakers, while the Monitor mode is optimized for floor monitoring application by taming problematic low frequencies that can be enhanced by floor reflection, and smoothing a wide range of frequencies to deliver the clarity professionals demand from their stage monitors.


The rear panel offers two combo XLR-1/4" inputs with XLR thru/outputs and dedicated level controls. A USB port allows for system upgrades and preset configuration and backups. The DZR12-D is equipped with an additional panel with two etherCON connectors (2-in/2-out) for interfacing with other Dante compatible equipment such as other speakers and Yamaha's CL/QL/TF digital mixing consoles. The Yamaha DZR12-D ships with a standard IEC power cord.

  • 2-way powered loudspeaker with a 2” HF and a 12" LF
  • Maximum 139dB SPL and 39Hz-20kHz frequency range is ideal for today's professional audio demands
  • High power 2000W Class-D amplifier module
  • 96kHz DSP and FIR filter for true high-resolution sound with super low latency
  • Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
  • Equipped with Dante I/O (2in/2out) and features SRC (sample rate conversion) allowing 48kHz device compatibility
  • Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
  • D-Contour and highly reliable protection circuits
  • Floor monitoring setting enables mirroring configuration
  • Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
  • Optional speaker cover (SPCVR-DZR12)
  • Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement

Configuration:

Active 2-Way

Enclosure Type:

Bass-Reflex Loudspeaker

Total Power Capacity:

2000 W Peak

1300 W RMS

Amplifier Power Rating

LF:1000 W Peak - 920 W RMS

HF:

1000 W Peak - 380 W RMS

Amplifier Class:

Class-D

HF Driver:

1 x Titanium Compression Driver with 1" / 25.4 mm Throat

HF Voice Coil:

2" / 50.8 mm

LF Driver:

1 x 12" / 30.5 cm Woofer

LF Voice Coil:

3" / 76.2 mm

Magnet HF:

Neodymium

LF:

Neodymium

Frequency Range:

39 Hz to 20 kHz -10 dB

Maximum SPL:

139 dB

Coverage Angle:

90° H x 60° V (Rotatable Horn)

50° H x 50° V (Monitor)

Max Line Input Level:

+24 dBu

I/O Impedance Input:

20 kOhms

Audio I/O:

2 x Combo XLR-1/4" Input - 2 x XLR Output

Network I/O:

2 x etherCON (Dante)

USB:

1 x USB Type-A (External Memory, Host Connection)

Crossover:

1.8 kHz

Max Sample Rate/Resolution:

96 kHz

AC Power Connector:

1 x IEC (Locking)

Power Consumption:

45 W (Idle) - 150 W (1/8 Power)

Mounting:

12 x M10 - 2 x 1.4" / 35 mm Pole Socket (Dual Angle)

Handles:

2

Construction Material:

Plywood

Dimensions:

16.1 x 25.4 x 15.5" / 408.9 x 645.2 x 393.7 mm

Weight:

47.2 lb / 21.4 kg

Estimate Delivery Cost

Ratings & Reviews Write a review   Average Rating: No reviews yet

No one has reviewed this product yet. Why not post your own review below?

You need to be logged in to write a review.

Click here to log in, or here to register